轻触开关TS C □P(S)

Contact Rating: 50 mA @ 12VDC
Electrical life: 100,000 cycles
Mechanical life: 100,000 cycles min
Position Travel : 0.25+0.2/-0.1
Insulation Resistance: ＞100MΩ DC250V
Withstand Voltage: AC250V 1 minute
Contact Resistance: ＜100mΩ
Ambient Temper.: -25℃ to 70℃
Operating Force: 70±20 gf；100±40 gf；130±40 gf；160±40 gf；170±50 gf；250±50 gf.
Soldering Process: Hand soldering：Use a soldering iron of 30 watts, controlled at 380℃ approximately 3 seconds while applying solder.
Wave soldering: When applying wave soldering, The plastic using PA6T(HTN), the peak temperature of the wave Oven should be set to 260℃max. Condition for soldering (Wave & Non-washable Type) Temperature Profile:（Figure 1）
Reflow soldering: When applying reflow soldering, The plastic using PA6T(HTN), the peak temperature of the reflow Oven should be set to 250℃max. Condition for soldering (Reflow & Non-washable Type) Temperature Profile:（Figure 2）