进口不锈钢立式多级管道泵(欧美进口品牌)

英国GRIMM格林进口不锈钢立式多级管道泵 UK GRIMM Stainless steel vertical multistage pipeline pump

英国GRIMM格林进口不锈钢立式多级管道泵概述：
         进口不锈钢立式多级管道泵是英国格林最新推出的新型管道泵系列产品。该管道泵吸入、排出口位于同一直线上。转子部件由轴、叶轮、叶轮挡套、轴套等零件组成，进水段、中段、出水段用拉紧螺栓联结。轴封采用机械密封，用平衡室的压力水进行润滑和冷却。是各大行业冷热水或物理化学性质类似于水等液体输送的最佳泵型。
         该产品全部采用计算机设计和优化处理，公司拥有雄厚的技术力量、丰富的生产经验和完善的检测手段，从而保证产品质量的稳定可靠。广泛应用于高压运行系统中冷热清水的循环和增压、高层建筑多台泵并联供水、消防、锅炉给水和冷却水系统及各种冲洗液的输送等。 

英国GRIMM格林进口不锈钢立式多级管道泵特点：
1、进口不锈钢立式多级管道泵为立式结构，具有占地面积小的特点，泵重心重合于泵脚中心，因而运行平稳、振动小、寿命长。
2、进口不锈钢立式多级管道泵口径相同且在同一水平中心线上，无需改变管路结构，可直接安装在管道的任何部们，安装极为方便。
3、电机外加防雨罩可直接置于室外使用，而无需建造泵房，大大节约基建投资。
4、进口不锈钢立式多级管道泵扬程可通过改变泵级数（叶轮数量）来满足不同要求，故适用范围广。
5、轴封采用硬质合金机械密封，密封可靠，无泄漏，机械损失小。
6、高效节能，外形美观。
7、注50口径以上内件铸件成形。
英国GRIMM格林进口不锈钢立式多级管道泵工作条件： 
1、用于输送清水或物理化学性质类似于清水的液体；
2、输送液体中应无固体颗粒，无纤维，无强腐蚀性，无爆炸危险；
3、最高液体温度不超过120℃；
4、最高工作压力不超过2.5MPa；
5、电源为三相380V、50HZ。电压波动在±5%以内； 
6、周围环境温度应低于40℃,相对湿度低于95%。

英国GRIMM格林进口不锈钢立式多级管道泵技术参数： 　 　
流       量：2-160m3/h
扬       程：24-200m
功       率：1.1-90kw
转       速：2900r/min
口       径：25-150mm
温度范围：-15~+120℃
工作压力：≤2.5Mpa

英国GRIMM格林进口不锈钢立式多级管道泵主要用途：

            进口不锈钢立式多级管道泵特别适用于锅炉给水，也可广泛应用于压力容器供水、热水循环、高层建筑给水、农田灌溉、消防增压、水力冲洗、、酿造、医药、化工、水产、环境保护、化工工艺流程及机床配套等各行业，作为给水排水的动力设备。

UK GRIMM Stainless steel vertical multistage pipeline pump summary:

           Stainless steel vertical multi-stage pipeline pump is the latest pipeline pump series introduced by Green in britain. The suction and discharge ports of the pipeline pump are in the same line. The rotor parts are composed of shafts, impellers, impellers, stop sleeves, shaft sleeves and so on. The water inlet, middle section and outlet section are connected by tension bolts. The shaft seal adopts mechanical seal and is lubricated and cooled by pressure water in the balance chamber. It is the best pump for the transportation of cold, hot water or physical and chemical properties of various industries, such as water.

        The products are all designed and optimized by computer. The company has strong technical force, rich production experience and perfect testing means, so as to ensure the stable and reliable product quality. Widely used in high voltage operation system, hot and cold water circulation and pressurization, high-rise building, multi pump parallel water supply, fire fighting, boiler feed water and cooling water system and various flushing fluid transportation, etc..

UK GRIMM Stainless steel vertical multistage pipeline pump characteristic:

1.Stainless steel vertical multi-stage pipeline pump for vertical structure, with small footprint, the pump center of gravity coincides with the center of the pump foot, so the operation is stable, small vibration, long life.

2.Stainless steel vertical multi-stage pipeline pump of the same caliber, and in the same level on the central line, without changing the pipe structure, can be installed directly in any part of the pipeline, the installation is very convenient.

3.The electric motor and the rainproof cover can be directly used outdoors, and the construction of pump house is not necessary, so the infrastructure investment is greatly saved.

4.Stainless steel vertical multi-stage pipeline pump head can change the pump series (impeller number) to meet different requirements, so the scope of application is wide.

5.Shaft seal adopts carbide mechanical seal, reliable sealing, no leakage, small mechanical loss.

6.High efficiency and energy saving, beautiful appearance.

7.Casting of 50 caliber above casting.

UK GRIMM Stainless steel vertical multistage pipeline pump working conditions:

1.For the delivery of clean water or physical and chemical properties, similar to the clear water of liquid;

2.The delivery of liquid should be no solid particles, no fiber, no strong corrosion, no explosion risk;

3.The highest liquid temperature is not more than 120℃;

4.The maximum work pressure is not more than 2.5MPa;

5.The power supply for three-phase 380V, 50HZ. Voltage fluctuation is less than +5%;

6.The ambient temperature should be lower than 40℃, relative humidity is less than 95%.

UK GRIMM Stainless steel vertical multistage pipeline pump technical parameters:

Flow rate: 2-160m3/h

Lift: 24-200m

Power: 1.1-90kw

Speed: 2900r/min

Caliber: 25-150mm

Temperature range: -15~+120℃

Working pressure: 2.5Mpa

UK GRIMM Stainless steel vertical multistage pipeline pump main use:

        imported stainless steel vertical multistage pipeline pump is especially suitable for boiler feed water, also can be widely used in pressure vessel of water supply, water circulation, high-rise building water supply, irrigation, fire booster, hydraulic flushing, food, brewing, pharmaceutical, chemical industry, aquaculture, environmental protection, chemical process and machine industries, as the power device the water supply and drainage.